{"id":251,"date":"2022-05-16T14:23:23","date_gmt":"2022-05-16T12:23:23","guid":{"rendered":"https:\/\/www.klinghammeritalia.com\/prodotto\/mod-dn-141\/"},"modified":"2022-05-17T16:48:14","modified_gmt":"2022-05-17T14:48:14","slug":"mod-dn-141","status":"publish","type":"dt_portfolio","link":"https:\/\/www.klinghammeritalia.com\/en\/prodotto\/mod-dn-141\/","title":{"rendered":"Mod. DN.141"},"content":{"rendered":"

[vc_row css=”.vc_custom_1615994768139{margin-top: 30px !important;}”][vc_column css=”.vc_custom_1616011728093{margin-bottom: 20px !important;}”][vc_column_text]<\/p>\n

|<\/span> Automatic necker machine<\/span><\/h2>\n

[\/vc_column_text][vc_row_inner content_placement=”middle”][vc_column_inner width=”1\/2″][vc_text_separator title=”GENERAL CHARACTERISTICS” i_icon_fontawesome=”fas fa-angle-double-right” i_color=”custom” add_icon=”true” i_custom_color=”#008b29″][vc_column_text]<\/p>\n

Machine for necking at one or both ends of round and irregular cans in a single operation with reduction of the same or differentiated diameter by means of dies, which according to technical needs have a fixed or expandable internal part, used to produce aerosol containers, cans for fruit juices and cans for soluble powder products and any other type of can falling within the dimensional limits indicated below that requires a necking operation. With the die necking operation, the can bodies are precisely calibrated to avoid any problems in the subsequent flanging operation. Due to the lack of high-speed rotating parts, the machine has a particularly quiet operation. This machine is fully automated.<\/p>\n

[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/2″][vc_single_image image=”224″ img_size=”full” alignment=”center”][\/vc_column_inner][\/vc_row_inner][vc_column_text]<\/p>\n

The can bodies pass from the gravity feed chute to the conveyor stars, where they enter their respective housings and are transported to the necking station and subsequently, by means of special cam extractors, exit into the output chute. The movement of the stars is carried out by an intermittent mechanism which gives them a sinusoidal movement giving acceleration and deceleration to ensure the lowest wear on the mechanical parts of the machine. All machine movements are mechanical, implemented by hardened cams with rectified profiles. The necking dies slide on large cylindrical guides and all the moving parts are contained in sturdy cast iron uprights: the presence of large doors guarantees easy access to the internal parts. The cams and the intermittent mechanism are in an oil bath and the cam rollers are highly resistant. The machine is also equipped with a torque limiter that causes it to stop immediately if the conveyor stars encounter obstacles in their movement.<\/p>\n

[\/vc_column_text][\/vc_column][\/vc_row][vc_row full_width=”stretch_row” css=”.vc_custom_1652465487047{padding-top: 30px !important;padding-bottom: 30px !important;background-color: #efefef !important;}”][vc_column css=”.vc_custom_1616011728093{margin-bottom: 20px !important;}”][vc_text_separator title=”TRANSMISSION AND PRODUCTION CAPACITY” i_icon_fontawesome=”fas fa-angle-double-right” i_color=”custom” add_icon=”true” i_custom_color=”#008b29″][vc_column_text]<\/p>\n

The transmission of movement occurs by means of chains. The mechanical speed of the machine is up to 120 cans\/minute and the actual speed varies according to the size of the box to be necked, the length of the necking, the reduction in diameter and the thickness and hardness of the sheet.<\/p>\n

[\/vc_column_text][\/vc_column][\/vc_row][vc_row full_width=”stretch_row” content_placement=”middle”][vc_column css=”.vc_custom_1616011728093{margin-bottom: 20px !important;}”][vc_text_separator title=”TOOLING CHANGE” i_icon_fontawesome=”fas fa-angle-double-right” i_color=”custom” add_icon=”true” i_custom_color=”#008b29″][vc_column_text]<\/p>\n

The format change time for the passage from one diameter to another is limited, as it only takes 30 minutes to replace the necking equipment and the conveyor stars. The transition to another can height requires an even shorter time, as only a few quick operations are required and takes place with the help of a millimeter precision ruler, calibrated on the cutting height of the can body.<\/p>\n

[\/vc_column_text][vc_text_separator title=”TECHNICAL DATA” i_icon_fontawesome=”fas fa-angle-double-right” i_color=”custom” add_icon=”true” i_custom_color=”#008b29″][vc_column_text]<\/p>\n

Max speed: <\/strong>120 cans\/min
\nDiameters:<\/strong> from 45 to 215 mm
\nHeights:<\/strong> from 80 to 350 mm
\nMax necking length:<\/strong> 5,5mm
\nMax sheet thickness:<\/strong> 0,32mm
\nMax weld overlap:<\/strong> 0,80mm
\nPower:<\/strong> 1,1Kw
\nWeight:<\/strong> 1025Kg
\nMax dimensions:<\/strong> 165 x 70 x 154 cm<\/p>\n

[\/vc_column_text][\/vc_column][\/vc_row][vc_row css=”.vc_custom_1616098030829{margin-top: 30px !important;margin-bottom: 30px !important;}”][vc_column]

Request information on this machine<\/h2><\/div>
<\/span><\/div><\/div>[vc_column_text]